what should a construction accident lawyer know?

by June Kris 3 min read

Helping with workers compensation claims. It’s very important to work with a construction accident attorney who knows the ins and outs of workers compensation claims. Some employers and their insurance carriers don’t cover the full extent of injuries to their workers, or will deny their claims.

Full Answer

How can a construction accident injury attorney help you?

A good construction accident attorney can help determine this and guide you through the process of pursuing your claim for damages. Here are some more construction accident facts you should know about if you are about to file a claim for …

Do I need an attorney for a construction lawsuit?

Our construction accident lawyers have experience calculating goal settlement or award amounts, and we can tell you how much you could seek. We Will Include Your Past, Present, and Future Damages in Your Claim

How to avoid construction accidents?

Apr 29, 2021 · After a construction worker has been hurt on the job, it is a good idea to consult a construction accident lawyer for legal advice. But if that accident results in death, either immediately or later on as a prolonged result of the injuries, the family of the worker is advised to talk to a wrongful death lawyer who specializes in construction cases. The Law Office of …

What are the most common types of construction accidents and hazards?

Aug 21, 2019 · This article will not only address construction injury prevention, safety procedures in construction, construction accidents and their causes, and how to prevent construction accidents, but also it will discuss the importance of consulting a New York construction accident lawyer. 1.Report dangerous working conditions.

image

What do construction lawyers do?

What construction lawyers do. Construction law lawyers assist a wide variety of clients anyone who touches the process of construction may need a construction attorney at some time or another. They represent large companies, individual workers, property owners, and sureties. There are a ton of different reasons these lawyers might be needed, ...

What are the biggest drivers of construction litigation?

Claims of defective construction are one of the biggest drivers of construction litigation. Regardless of what side a party is on — whether they’re claiming a defect is present or defending against a claim of defective work — construction lawyers will help to provide clarity to the situation and might actually help to avoid litigation. They’ll be able to decipher the relevant laws and contractual duties in order to uncover who, if anyone, is at fault and who might be liable.

Why is small claims court important?

Small claims court is unique. It’s specifically designed to be a faster, less expensive, and overall more efficient version of traditional litigation. Plus, it’s designed so that lawyers aren’t really needed in the same way they’re needed in regular litigation. However, the same rule applies as above.

Is bankruptcy a construction law?

If you think construction law is unique, bankruptcy law takes things to a whole new level. There is a separate court system for bankruptcies, and not every lawyer has the experience necessary to navigate this process. A construction attorney may be able to help you through some of the procedures, but you may also want to hire a bankruptcy lawyer for this specific scenario.

Is it bad to fight a lawsuit without a lawyer?

Fighting a lawsuit without the help of a lawyer is a bad idea . Sure, a lawyer might get expensive — but losing the suit (and failing to minimize exposure) will cost a lot more. Not to mention, they might be able to identify cross-claims to work in your favor.

Can a customer file for bankruptcy?

Perhaps more problematic is when a customer or a property owner on a project files for bankruptcy, especially when you have outstanding invoices that you want to collect on . Bankruptcy courts have specific rules for creditors in a bankruptcy, which includes timing requirements for collection actions.

Is it bad to represent yourself in court?

Even if you are entitled to, representing yourself in court is often a very bad idea. There’s a mountain of literature out there proving why. Lawyers are experts at their trade, and there’s a reason they get paid to do what they do.

How Construction Accidents Happen in New York City

Unfortunately, falls are all too common among construction workers who are assigned to projects in the five boroughs. These falls often happen when professionals are working on roofs, scaffolding, ladders, and with heavy equipment.

What to Do When a Construction Accident Results in Death

As with any accident, the most important thing to do first is seek medical attention to take care of your health. Construction workers should let their supervisors know about the accident as soon as possible and also take note of any other workers on the site who might serve as potential witnesses.

How a NYC Construction Wrongful Death Attorney Can Help

Spouses, financial dependents, life partners, and even distant family members can pursue a wrongful death case on a construction worker’s behalf. These are important claims to pursue because they bring the at-fault construction company, governmental body, or other third-party to justice for the devastating loss in your life.

How to avoid construction accidents?

In order to avoid construction accidents and increase safety precautions in construction site, always try to maintain the cleanliness of the construction site by putting away tools and clearing debris to avoid slip and fall injuries.

Why are construction accidents increasing?

The reason for the increase in accidents has to do with increased fatigue at night, not being as alert during the day, and a reduction in visibility. 7. Safety Gear. When it comes to construction safety accidents, more often than not, construction equipment accidents have to do with a lack of proper safety gear.

How to prevent scaffolding accidents?

In order to prevent construction equipment accidents, all scaffolding should be inspected to ensure that workers are properly tethered to the scaffolding in case a slip or fall is to occur. This tethering can be the difference between life and death for a worker working many stories up in the sky. Check the equipment each and every day for any signs that it is not in working order. Moreover, it is better to delay the construction process and ensure that workers are safe than to see an injury or death occur due to negligence.

What is the leading cause of construction site accidents resulting in injury or even death?

According to the Occupational Health Safety Administration (OSHA), falls are the leading cause of construction site accidents resulting in injury or even death. It is a proven fact that workers who are even just six feet or more above a ground-floor level are at serious risk for major injury or death.

What are safety precautions in construction?

Another tip when it comes to safety precautions in construction site is for there to be clear signs warning of any danger. Specifically, wires and high voltage areas should be marked and the electricity should be deactivated when it is not in use.

Why do construction sites need strobes?

One of the most common reasons for construction accidents or construction site accidents is due to vehicle accidents, such as forklifts or construction vehicles. Accordingly, for vehicle and machine operators, vehicle warning strobes are needed to warn approaching traffic, thereby requiring pylons, barrels, buffer zones, safety spotters and daytime running lights. Drivers should be instructed to slow down and to avoid backing up whenever possible. If backing up is needed, a spotter should be assigned.

Why should all tools be inspected?

All tools, whether they are handheld or machine operated, should be inspected regularly and maintained to ensure that they are functioning properly and that they pose no danger to yourself or anybody else. This includes making sure that all electrical and gas-powered equipment are not defective. This is one of the best ways to prevent construction equipment accidents and construction accident NYC.

How much can you collect from a construction accident?

Construction workers who get totally or partially disabled in a work-related accident can collect up to two-thirds of their average weekly wage until they can resume working. If employees can return to limited work, they may receive payment for the difference in their earning capacity. Death benefits.

What are the injuries that can occur from working with a saw?

Working with saws, nail guns, drills, power sanders, spray guns, electrical components, and hand tools often leads to construction injuries. Faulty equipment. Defective or poorly maintained equipment can cause amputations, broken bones, or other injuries. Improper storage, loading, and unloading.

What can a lawyer do for a worker's compensation claim?

Second, the lawyer can help the worker appeal any partial or total denial of a workers’ compensation claim . Third, the lawyer can investigate the worker’s construction accident to determine whether there are third parties who may have a legal liability to the worker for damages.

What are the chemicals used in construction?

Chemical exposure. Many of the chemicals used on construction sites, such as lead, silica, asbestos, or mercury, are toxic and hazardous to worker health in the absence of safety precautions.

What to do after an accident in New York?

Immediately after a New York accident, report the accident to your employer and seek medical attention from an authorized provider. Even if you think you have not been injured, seek medical care to make sure. Doing so protects your help and generates medical records that could support your claim later.

What are the jobs that construction workers do?

Carpenters, laborers, electricians, plumbers, masons, and sheet metal workers toil at construction jobs every day, building everything from houses and office buildings to roads and bridges. Construction workers accept some risk in their work.

Is a construction worker covered by workers compensation?

Any employee of a New York construction business should be covered by workers’ compensation benefits; ask an attorney for help if you believe your employer has improperly classified you as something other than an employee. In New York, workers’ compensation benefits consist of: Full coverage of medical care.

Who is the lawyer for a concrete accident?

For more information about your legal rights following a concrete disaster, call Steve Lee, the experienced work accident lawyer, at 800-232-3711.

What are the mandates for employers to provide adequate warning signs and guards when cement hazards are present on the construction site

These mandates include: Hazard communication. In addition to warning their employees of the potential risks, employers must also provide adequate warning signs and guards when cement hazards are present on the construction site. Respiratory protection.

What is concrete workers compensation?

Concrete Workers’ Compensation. Concrete construction accidents often come with long-term consequences for those injured. This is where workers’ compensation comes in. When a workplace injury results in not only physical pain but also financial pain, workers’ compensation can help victims pay for:

What are the hazards of mixing cement and cement?

A quick overview of the noteworthy hazards would include…. Mixing risks. Concrete dust can cause breathing problems. Concrete is composed of small pieces of stone, called aggregate. When these stones are mixed with cement, the tiny particles of aggregate dust can be dispersed into the air and inhaled. Pouring risks.

What are the dangers of concrete?

Concrete Dangers. Concrete construction accidents can happen in many different ways. When working on or around concrete, you need to be continually vigilant to ensure you work as safely as possible. Some common mishaps that can cause concrete construction accidents include: Workers falling onto concrete slabs.

How much does concrete weigh?

Concrete slabs can weigh more than 800 pounds and are at risk for tipping, shifting, and falling on those around them. Almost every job that you can have as a construction worker carries a possibility of working with concrete…which ultimately increases your chances of sustaining serious injuries.

What are the safety standards for concrete?

These mandates include: Hazard communication.

image